The Sci-Print MP2
A semi-automated barcode label printer
The Sci-Print MP2 from Scinomix is a semi-automated label printer for microplates. The Sci-print MP2 prints and applies labels to a wide variety of microtiter plates that are on the market.
Want a way to track your valuable samples? With the Sci-Print MP2 you are able to print and apply sticker labels to your micro-plates and never loose track of your samples again. The system allows you to print any text you like. The MP2 even prints standard laboratory barcodes, including 1D and 2D.
Turn the Sci-Print MP2 into a fully automated system
To enable you to focus on your core research.
The Sci-print MP2 can be used in a manual stand-alone environment. But what makes the MP2 so valuable is the ability to integrate it into a fully automated system, which gives you valuable walk-away time. Versatile software allows the system to be used as a stand-alone device, or integrated into automated plate handling systems. An optional barcode scanner can be added to the system for validation.
With its rotating, height-adjusting platform, the MP2 provides the flexibility to print on all four sides and two vertical levels of the plate and deep well blocks.
The Sci-print MP2 is also a fast operating system. It applies a single label in just under four seconds. This means that the Sci-Print MP2 is ideal for high-through put working environments.
Print a wide variety of sample tracking codes
Or anything you want
In the regular setup you get delivered, there is already a wide variety of codes you are able to print. These following barcode symbologies are enabled upon delivery:
- Code 128
- Code 39 (full ASCII)
- Interleaved 2 of 5
- Data Matrix (2D)
Do you require to print anything outside of this list? Feel free to contact us so we can see if we can further assist you. We always try to assist you and adapt the system to your needs.
Product features
The Sci-Print MP2 is a small, compact device that saves valuable space in the lab.
With the Sci-Print MP2, users can print a variety of 1D and 2D barcodes.
The Sci-Print MP2 is a compact device that increases walk-away time in the lab, accelerating productivity.
With the Sci-Print MP2, users can consistently place barcodes on a variety of sample storage racks.
- Labelling Speed 4 seconds per label
- Labels up to 4 sides of a plate
- Optional barcode scanner for validation
- Windows based software printer
- Includes 600 dpi thermal transfer printer
- Easily integrates into third-party systems
- Standard label size 2.0″ W x 0.25″ H
- Plate type requirements ANSI/SLAS plates
- Max Plate Height 46mm
- Min Plate Height 6mm
- Air pressure requirements 80-90 PSI @ 2.5 CFM
- Air-compressor requirements Oil/contaminant free
- Air-compressor components requirements Inline Regulator, Air dryer
- Main Power Requirements Printer 110-240V AC @2A 50-60Hz
- Main Power Requirements Power Supply 120-240VAC @ 1.4A, 50-60Hz
- Provided Power Supply Output Voltage 24 V DC
- Max Output Current 2.71 A
- Max Output Power 65 W
- Max Ripple and Noise 240 mV p-p
- Transport and Storage Temperature: -20 degrees C to +55 degrees C
- Operating Environment Indoor Only
- Operating Temperature 10 degrees C to 40 degrees C
- Operating Humidity 20% to 80% non-condensing
- Operating Altitude Up to 2000M
- Width: 7.7” (196mm)
- Height: 12.4” (358mm)
- Depth: 28.9” (733mm)
- Weight: 37.5 lb. (17KG)
Satisfied customers
That's why we do it
Need more information?
Don't hesitate to contact us
Want to learn more about the Sci-Print MP2? Eager to request a demo? Contact us today with your questions.
Request more info - Equipment
Related products
These products are also often chosen
